845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Metal Asbestos Roof Braces
For freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. Mounts easily onto top of roof through opening that allows 2" clearance. Maximum length of chimney which can be suspended below is 20'. Maximum total length is 30'. The Roof Support Kit (RSK) contains roof brackets and necessary hardware. The Roof Support Package (RSP) contains one 18" length of pipe, roof brackets and necessary hardware. The brackets may be assembled to any standard pipe length at any desired height. Locking bands must be used at each pipe joint when installing either the RSK or RSP.
Can be used whenever there is a need to stabilize the chimney above the roof level. The purpose of the bracing is to hold the chimney against wind load and to prevent damage from static and sliding snow. Up to 4' above the roof requires no bracing. From 5' to 10' above the roof 1 roof brace kit should be used, at a midpoint on the chimney. Over 10' use 1 roof brace kit 4' from the roof and 1 roof brace kit every 5' thereafter. Includes roof brace only - chimney and top not included.
Can be used whenever there is a need to stabilize the chimney above the roof level. The purpose of the bracing is to hold the chimney against wind load and to prevent damage from static and sliding snow. Up to 4' above the roof requires no bracing. From 5' to 10' above the roof 1 roof brace kit should be used, at a midpoint on the chimney. Over 10' use 1 roof brace kit 4' from the roof and 1 roof brace kit every 5' thereafter. Includes roof brace only - chimney and top not included.
For freestanding fireplaces and open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. Mounts easily onto top of roof through opening that allows 2" clearance. Maximum length of chimney which can be suspended below is 20'. Maximum total length is 30'. The Roof Support Kit (RSK) contains roof brackets and necessary hardware. The Roof Support Package (RSP) contains one 18" length of pipe, roof brackets and necessary hardware. The bracketsmay be assembled to any standard pipe length at any desired height. Locking bands must be used at each pipe joint when installing either the RSK or RSP.
Used to seal the opening where the chimney penetrates the roof and to divert rain and snow down from the roof and away from the chimney system.